Brother BAS-311F-0 Instruction Manual page 46

8. Press .
9. Select with
10. Select ON/OFF of needle stopping at the bottom
with and press
11. Program pattern 2.
12. Program pattern 3 in the similar manner.
13. When pattern 3 is programmed, press
Inputting the end code
1. Select with
2. Select the end code type with
.
"111" is selected in the example. Press
work clamp returns to the first stitch (point A).
3. Press .
The work clamp returns to the home position.
Saving
1. Select with
and press .
.
.
and press .
and press
and the
and press .
Programmer
Chapter 2 Programming with Help Function
45