Checking The Program Setting And Setting Attribute - Brother BAS-311F-0 Instruction Manual

Checking the program setting and setting attribute

Checking the program setting and setting attribute
The following items are displayed.
End code
Current needle position/Total stitch count
Distance from the previous position in the X and Y axial directions
Stitch data type and availability of the option
output, low-speed sewing(*)
Feed data type and availability of the option
output, with/without thread.
Needle stop position of the split data (*)
Extended option output no. of the trigger data and
with/without machine stoppage (*) (BAS-300Series)
Attribute of items marked with * are available for setting.
An example of stitch data is shown below.
Option output
present/absent Slow conversion
Stitch data type
1. Select or
End code
and press .
Displayed at points where stitch is set.
Displayed at points where feed data is
set
Displayed at points where split data is
set.
Displayed at points where trigger is
set.
Current stitch count
Total stitch count
Distance from the previous
point in the direction of X
or Y axis
Selecting from the main menu
Selecting from the data programming menu
Programmer
Chapter 2 Programming with Help Function
109