Reading Other Types Of Data - Brother BAS-311F-0 Instruction Manual

Reading other types of data

Reads data created in other machines.
The following 3 data can be read.
DST
DSB
DSZ
This operation cannot be available in command mode.
1. Select and press
2. Make sure that
3. Select the data type for reading by pressing
4. Press .
The data name (in 8 alphanumeric characters) saved in a floppy disk is displayed.
.
is selected, and press
Programmer
.
and press to put a check mark.
Chapter 5 Reading/Writing Data
221