Creating A Circle (Zigzag Circle) By Specifying 3 Points - Brother BAS-311F-0 Instruction Manual

Creating a circle (zigzag circle) by specifying 3 points

Command to be used
1. Select the sewing start position with
2. Input
3. Input the stitch length in 3 digits and press
Input the overlap stitch counts in
Input this command to create a zigzag circle. Input the zigzag width in
The zigzag width can be specified from 1.0 - 25.5 mm.
To specify the width of 10.0 mm or more, input
width in 3 digits, then press
Example: Pitch
3.5mm
18.0mm
Input this command to create a zigzag circle. Input the zigzag stitch length in
.
Example: Pitch
0.5mm
12.0mm
.
Values 0 - 9 are available for input.
.
Input
Input
005
120
and press
.
Programmer
Chapter 3 Programming with Command Function
.
.
and input the
165