Creating Feed Data - Brother BAS-311F-0 Instruction Manual

Chapter 3 Programming with Command Function
3. Move the needle with
4. Move the needle to the corner point and input
5. Repeat steps 3 and 4 and move the needle to the end point. Input
When the alarm sound is complete, the needle point moves to the end position.

Creating feed data

Command to be used
1. Press .
2. Determine the feed point with
178
to select the second point, then press
Specifying split (the separation point for different patterns in sewing)
after feed
Moving in parallel for the feed
Creating split data after basting
Creating basting data
.
Programmer
.
.
.