Brother BAS-311F-0 Instruction Manual page 80

3. When the needle point reaches 1, press
The work clamp stops. If the work clamp passes,
input a few stitches and press
returns for a few stitches of the input.
4. Press .
Moving in parallel
1. Select with
2. Select with
3. Move the work clamp with
when the needle point is at 2.
Move 3 to 4 in the similar manner.
4. Press three times.
Saving
1. Select with
2. Select with
3. Input the data number and press
4. Press .
. The needle
and press .
and press .
. Press
and press .
and press .
.
Programmer
.
Chapter 2 Programming with Help Function
79