Brother BAS-311F-0 Instruction Manual page 113

Chapter 2 Programming with Help Function
Setting the attribute (split data)
1. Move to the desired needle position and press
The attribute setting screen appears.
2. Set the attribute.
3. Press after setting.
The screen returns to the confirmation screen.
Setting the attribute (trigger data) (BAS-300 Series)
1. Move to the desired needle position and press
The attribute setting screen appears.
2. Set the attribute.
3. Press after setting.
The screen returns to the confirmation screen.
112
Extended option output trigger
Press or -
.
Stoppage of the needle at the lower end
Press to select ON/OFF.
.
to select the number.
Machine stop
Press to select ON/OFF.
Programmer