Brother BAS-311F-0 Instruction Manual page 56

2. Select with
3. Select with
4. Input the data number and press
5. Press .
Moving to position 4.
1. Select with
2. Press
The work clamp moves from the start position by
each stitch.
3. When the needle point reaches 4, press
The work clamp stops. If the work clamp passes,
input a few stitches and press
returns for a few stitches of the input.
4. Press .
Programming a new point.
1. Select with
2. Move the work clamp with
when the needle point is at 5'.
and press .
and press .
.
and press .
and press .
. The needle
and press
.
.
. Press
Programmer
Chapter 2 Programming with Help Function
55