Brother BAS-311F-0 Instruction Manual page 50

Creating a stitch pattern
1. Create a pattern in consideration of the most
inside and outside lines for a multiple stitch.
The two lines should be spaced uniformly.
2. Connect each direction change point on the
inside line with the matched direction change
point on the outside line using a line.
3. Provide one point (or more points) between the
above two direction change points, and connect
them using a line.
Follow the procedure for curve points specification.
Specify points in pairs on the inside and outside
lines. The lines should be spaced uniformly.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
28
27
24
25
26
23
20 21
22
7 8
6
19
3
4 5
18
2
1
Programmer
Chapter 2 Programming with Help Function
Should be spaced
uniformly.
Outside line
29
11
31 32
10
30
9
12
33
34
13
14 15
16
17
Inside line
49