Double Stitch - Brother BAS-311F-0 Instruction Manual

Chapter 2 Programming with Help Function

Double stitch

When the line changes from straight to curve as in points B or E, be sure to press
make a split.
More intermediate points such as points C or D will create smooth curves.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
2. Select with
3. Move the work clamp with
when the needle point is at point A of the pattern.
The first stitch (point A) is programmed.
4. Select with
5. Select the double stitch type and press
6. Input the stitch length and the width of the
double stitch. Press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
To switch input between the stitch length and the
width, use .
34
A double stitch is programmed to make two lines with a
constant width.
The example in the left is used for explanation of a double
stitch to the left of sewing direction.
and press .
. Press
and press .
.
.
Programmer
twice to