Brother BAS-311F-0 Instruction Manual page 27

Chapter 2 Programming with Help Function
7. When point C is programmed, press
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
work clamp returns to the first stitch(point A).
3. Press .
The work clamp returns to the home position.
Saving
1. Select with
2. Select with
3. Input the data number and press
4. Press .
Ending program
1. Press .
26
.
and press .
and
and the
and press .
and press .
.
Programmer