Deleting a part of the program during programming
1.
Press
.
2.
Input the number of stitches to be deleted and
press
.
The example is deleting 2 stitches backward.
Press
.
3.
The needle point moves to 6.
4.
Continue programming.
Moving a part of continuous program in parallel
Calling data
1.
Specify the program number on the operation
panel and press the read/write switch to read
the data.
A program can be modified during programming. The
example in the left is used for explanation of deleting 2
stitches at 8 and creating a new program.
A part of continuous program is moved in parallel. The
example in the left is used for explanation of moving patterns
B an C in parallel.
Programmer
Chapter 3 Programming with Command Function
159