Chapter 2 Programming with Help Function
Checking each stitch
1.
Press
to move forward,
The needle steps by each stitch and the setting of the data is displayed.
Checking a series of stitches automatically
1.
Input the stitch count to check.
2.
Press
to move forward,
The needle moves by the input count and the setting of the data is displayed.
Input "999" to check all stitches.
Skipping
1.
Input the stitch count to the destination.
2.
Press
, then press
The needle skips sewing according to the input stitch count.
Input "999" to skip sewing to the sewing end position or to a breakpoint.
Setting the attribute (stitch data)
1.
Move to the desired needle position and press
The attribute setting screen appears.
110
to backward.
to backward.
to move forward and
Programmer
to move backward.
.