Creating Split Data; Creating Magnified Data - Brother BAS-311F-0 Instruction Manual

3. Input command depending on the feed.
Press if not specified.

Creating split data

Command to be used
1. Input command depending on the split.

Creating magnified data

Command to be used
The following three scales are available for magnification: x2, x5, and x10.
Use a pattern sheet suitable for the magnified pattern.
The magnified data is reduced when the end code is input.
1. Make sure that the needle is at the home position.
Press if not specified.
2. Select magnification and press
Stopping the needle at the upper end for the split.
Stopping the needle at the lower end for the split.
Input for magnification (x2)
Input for magnification (x5)
Input for magnification (x10)
Programmer
Chapter 3 Programming with Command Function
.
179