Deleting The Escape Point - Brother BAS-311F-0 Instruction Manual

4. The needle point moves to B.
Saving
1. Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1. Press .

Deleting the escape point

Calling data
1. Specify the program number on the operation
panel and press the read/write switch to read
the data.
Moving to position A.
1. Press and press
The work clamp moves to the escape point.
The escape point is deleted. The example in the left is used
for explanation of deleting A.
.
Programmer
Chapter 3 Programming with Command Function
155