Brother BAS-311F-0 Instruction Manual page 33

Chapter 2 Programming with Help Function
5. Input the stitch length and press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
6. Move the work clamp with
when the needle point is at point B of the
pattern.
7. Repeat step 6 and create the program to point
C.
8. When point C is programmed, press
Point C becomes a corner and is programmed. To
change the stitch length, press
9. Create the program to point E.
10. When point E is programmed, press
11. Create the program to point I.
12. When point I is programmed, press
13. Press twice.
Inputting the end code
1. Select with
2. Select the end code type with
.
"111" is selected in the example. Press
work clamp returns to the first stitch (point A).
3. Press .
The work clamp returns to the home position.
32
.
. Press
again.
for resetting.
again.
again.
and press .
and press
and the
Programmer