Brother BAS-311F-0 Instruction Manual page 67

Chapter 2 Programming with Help Function
Programming a new point
1. Select with
2. Move the work clamp with
the needle point is at A of the pattern.
Record the coordinates (values of X and Y).
3. Press .
A is programmed.
4. Move the work clamp with
opposite position of coordinates recorded in
step 2 so that the needle point is at 1 of the
pattern.
5. Press .
1 is programmed again.
6. Press .
Deleting 1
1. Select with
2. Press and press
The work clamp moves to the sewing start position.
3. Press .
4. Select with
5. Input the number of stitches to be deleted and
press .
The example is deleting 1 stitch. Press
66
and press .
so that
to the
and press .
.
and press .
.
Programmer