Description of commands
Moving needle point
Deleting data
Ending programming
Proceeding by
Returning by
Proceeding to the end point
Returning to the first point
Proceeding by skipping
Returning by skipping
Skipping to the end point (not applicable at the home position)
Skipping to the first point
Returning the position to the home position.
Deleting all data.
Deleting data from
Deleting data before
Normal end
Fixing the sewing speed at 1000 rpm or lower.
Carrying out no thread wiping.
Setting the sewing speed at 1000 rpm or lower without thread wiping.
Carrying out no thread trimming.
Fixing the sewing speed at 1500 rpm or lower.
stitches
stitches
stitches
stitches
stitches
stitches
Programmer
Chapter 3 Programming with Command Function
123