To Draw A Circle By Specifying Three Points - Brother PS-300B Instruction Manual

4. Right-click once to close the polygon.
To draw a circle by specifying three points (Shape-Circle,
1. Do one of the following:
On the Shape drop-down menu, click Circle.
Click the Circle icon
When the pointer is moved into the design area, its shape changes to
2. In the design area, specify the desired location for a point of the circle (1 in the figure
below).
3. Specify the desired location for the second point (2 in the figure below), which also
determines the minimum diameter of the circle.
4. Specify the desired location for the third point (3 in the figure below), so that the circle is
the desired size.
in the toolbar.
95/164
):
.