Creating A Circle (Zigzag Circle) By Specifying 3 Points - Brother BAS-311E Instruction Manual

Creating a circle (zigzag circle) by specifying 3 points

Command to be used
2 0 LI
7 M
M
1. Select the sewing start position with
2. Input
2 0
3. Input the stitch length in 3 digits and press
Input the overlap stitch counts in
available for input.
Input this command to create a zigzag circle. Input the zigzag
width in .
The zigzag width can be specified from 1.0 - 25.5 mm.
To specify the width of 10.0 mm or more, input
and input the width in 3 digits, then press
Example: Pitch
3.5mm
18.0mm
Input this command to create a zigzag circle. Input the zigzag
stitch length in
Example: Pitch
0.5mm
12.0mm
.
LI LI
Programmer
Chapter 3 Programming with Command Function
Values 0 - 9 are
Input
7 3 5 M
7 0 0 M
.
Input
005
120
and press
.
LI LI
7 0 0 M
.
M
1 8 0 M
.
L
163