Table of Contents
Advertisement
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
5-2-1. Description of detailed home screen
(1)
Screen lock key
Screen unlock key
(2)
Illumination LED on key
Illumination LED off key
(3)
Program No. UP key
Program No. DOWN
key
(4)
Main stitch pitch key
(5)
Main sewing speed key
(6)
Production counter key
Lower thread counter
key
(7)
Needle up/down key
(8)
Thread trimming lock
key
(9)
Thread wiper key
(10)
Correction key
(11)
AUTO key
(12)
Slow start key
(13)
Special locus key
(14)
Best PFM key
(15)
X-over seam assist
mode key
(16)
Start backtack key
(17)
Main sewing key
(18)
End backtack key
21
Program No.
Main stitch pitch
(16)
(17)
(18)
Press this key to switch the home screen between locked and unlocked.
NOTE:
At the time of shipment from the factory, the screen is set to lock automatically
if no operations are carried out for one minute. (Refer to memory switch
MSW-310.)
Press this key to switch the illumination LED between on and off.
If you keep pressing this key, the display switches to the illumination LED
brightness setting screen.
Press this key to increase the program number.
Press this key to decrease the program number.
If you keep pressing this key, the display switches to the stitch pitch setting screen.
If you keep pressing this key, the display switches to the main sewing speed
setting screen.
If you keep pressing this key while the production counter is displayed, the display
switches to the production counter setting screen.
If you keep pressing this key while the production counter is displayed, the display
switches to the production counter setting screen.
Press this key to switch the stop position after sewing (needle up/needle down).
Press this key to switch thread trimming locking (disabled/enabled) when the
treadle is depressed backward.
Press this key to switch the thread wiper operation (off/on).
Press this key to switch correction sewing operation (off/on) by using the hand
switch.
Press this key to switch between different sewing operations (normal sewing
/automatic sewing/automatic sewing with thread trimming).
Press this key to switch slow start operation at the sewing start (off/1/2/3/4).
Press this key to switch the special locus operation for the feed dog (off/1/2/3).
Press this key to switch the best PFM mode (off/pulling out/short trailing
length/pulling out + short trailing length).
If you keep pressing this key, the display switches to the best PFM mode setting
screen.
This switches X-over seam assist mode (disabled/enabled).
If you keep pressing this key, the display switches to the X-over seam assist mode
setting screen.
Press this key to switch the start backtack sewing operation (off/on).
If you keep pressing this key, the display switches to the start backtack setting
screen.
If you keep pressing this key, the display switches to the main sewing setting
screen.
Press this key to switch the end backtack sewing operation (off/on).
If you keep pressing this key, the display switches to the end backtack setting
screen.
(3)
(2)
(4)
(5)
(6)
(7)
(8)
(10)
(11)
(13)
(14)
S-7300A
(1)
Main sewing speed
Target counter
Production counter
(9)
(12)
(15)
Advertisement
Table of Contents
