Description Of Commands; Moving Needle Point; Deleting Data; Ending Programming - Brother BAS-311E Instruction Manual

Description of commands

Moving needle point

Proceeding by
Returning by
Proceeding to the end point
9 9 9
Returning to the first point
9 9 9
Proceeding by skipping
F
Returning by skipping
F
Skipping to the end point (not applicable at the home position)
F 9 9 9
Skipping to the first point
9 9 9
F
Returning the position to the home position.
R

Deleting data

Deleting all data.
2 2 2 R
Deleting data from
C
Deleting data before
C

Ending programming

Normal end
1 1 1 E
Fixing the sewing speed at 1000 spm or lower.
1 1 2 E
Not carrying out thread removal.
1 1 3 E
Setting the sewing speed at 1000 spm or lower without thread
1 1 4 E
removal.
Carrying out no thread breakage.
1 1 5 E
Fixing the sewing speed at 1500 spm or lower.
1 1 6 E
Chaprter 3 Programming with Command Function
stitches
stitches
Programmer
stitches
stitches
stitches
stitches
121