Table of Contents
Advertisement
3 USING THE OPERATION PANEL AND SWITCHES
3.1 Name and function of each operation panel item
End detection sensor
(1)
Used to switch the end detection sensor between on
and off.
Program number
(2)
Used to select programs.
Step No.
(3)
Used to select and edit steps.
Glue thickness
(4)
Used to set the glue thickness.
Nozzle space
(5)
Used to set the nozzle clearance.
Upper roller feed speed
(6)
Used to set the feed speed for the upper roller.
Lower roller feed speed
(7)
Used to set the feed speed for the lower roller.
Upper cloth glue-free width
(8)
Used to set the glue-free width for the upper cloth.
Lower cloth glue-free width
(9)
Used to set the glue-free width for the lower cloth.
Anti stop mark
(10)
Used to set anti-stop marks.
Glue heating time
(11)
Shows the total time required for heating a single glue
cartridge.
Glue level
(12)
Shows the amount of glue remaining in the glue
cartridge.
Nozzle glue width
(13)
Shows the gluing width for the nozzle which is currently
attached.
(24)
(2)
(6)
(5)
(4)
(7)
(11)
(12)
(15)
(16)
3 USING THE OPERATION PANEL AND SWITCHES
(22)
(3)
(1)
(17)
(18)
(20)
Change program No.
(14)
Used to increase or decrease the program number.
HOME key
(15)
Used to switch to the home screen.
Test key
(16)
Used to switch to test mode.
Sleep key
(17)
Used to switch manually to sleep mode. In addition, if it
is held down while already in sleep mode, then sleep
mode is canceled.
Menu key
(18)
Used to switch to the setting menu screen.
Reverse key
(19)
Used to switch to reverse mode.
Nozzle cap key
(20)
Used to switch to shutdown proccedure.
Change step No. key
(21)
Used to increase or decrease the step number.
Caution indicator
(22)
Illuminates when an error or a warning occurs.
Power indicator
(23)
Illuminates when the power is turned on.
Comment
(24)
Shows program comments. In addition, touch it to set
comments.
BM-2000
(23)
(8)
(9)
(10)
(14)
(13)
(21)
(19)
7
Advertisement
Table of Contents
