Checking Each Stitch; Checking A Series Of Stitches Automatically; Skipping - Brother BAS-311E Instruction Manual

Chapte 2 Programming with Help Function
1.
1.
2.
1.
2.
Setting the attribute (stitch data)
1.
108

Checking each stitch

Press to move forward,
The needle steps by each stitch and the setting of the data is displayed.

Checking a series of stitches automatically

Input the stitch count to check.
Press to move forward,
The needle moves by the input count and the setting of the data is displayed.
Input "999" to check all stitches.

Skipping

Input the stitch count to the destination.
Press , then press
F
The needle skips sewing according to the input stitch count.
Input "999" to skip sewing to the sewing end position or to a breakpoint.
Move to the desired needle position and press
The attribute setting screen appears.
to backward.
to backward.
to move forward and
Programmer
to move backward.
.