Hp_Fanmodule - HP Integrity BL860c Datasheet

Table 5-9
Class: HP_SystemFan
Property name
PartComponent

5.3.9HP_FanModule

HP_FanModule is used to model the physical fans on Integrity Servers. The Windows specific
implementation class is HP_FanModule. Note: Fan numbers for existing instances do not change
when other fans are added and removed.
Table 5-10
Class: HP_FanModule
Property name
Caption
Description
ElementName
OperationalStatus[0]
StatusDescription[0]
HealthState
Name
CreationClassName
Tag
Property implementation
References HP_Fan
Property implementation
CIM_ManagedElement
Fan n:Location, where n represents the number of
the fan instance. For example, Fan 1:cabinet 0 –
blower 0.
Fan n:Location provides cooling for FanType.
StatusDescription, where n represents the number of the
fan instance, FanType represents the corresponding
string value of the FanType enumeration and
StatusDescription represents the value of
StatusDescriptions[0]
Fan n:Location, where n represents the number of
the fan instance. For example, Fan 1:cabinet 0 –
blower 0.
CIM_ManagedSystemElement
•
2 (OK) – if fan is operating properly;
•
6 (Error) – if fan has failed
•
Fan is operating properly – if
OperationalStatus[0] is 2 (OK)
•
Fan has failed – if OperationalStatus is 6
(Error)
•
5 (OK) – if fan is operating properly
•
20 (Major Failure) – if fan has failed
Fan n, where n represents the number of the fan
instance.
CIM_ PhysicalElement
HP_FanModule
Unique identifier for this fan module instance.
CIM_ PhysicalPackage
System fan 69