Hphdr_Remoteserviceaccesspoint - HP Integrity BL860c Datasheet

Table 22-5
Class: HPHDR_LogicalDisk
Property name
OtherIdentifyingInfo

22.3.5HPHDR_RemoteServiceAccessPoint

HPHDR_RemoteServiceAccessPoint represents the Target Based Management Point for the Logical
Disk. There is one instance per access point.
Table 22-6
Class: HPHDR_LogicalDisk
Property name
Caption
ElementName
Description
EnabledDefault
EnabledState
RequestedState
Name
CreationClassName
SystemCreationClassName
Property implementation
This contains the additional data for this logical disk
drive. The format is:
OtherIdentifyingInfo[0]="OSDeviceName,"ProductID+
VendorID+Firmware Revision+ VPD Page 80 unit serial
number. Clients must access OtherIdentifying[0] as this
is an array of CIM_STRING.
For example, \\.\PhysicalDrive0 ,HD160JJ/P +
SAMSUNG + ZM10 +
30534644314a505530313338323820202020202
0
Property implementation
CIM_ManagedElement
Description for the Target Based Mangement Point
For example, Primary Remote Access Point for
\\?\Volume{394cd96b-8678-11dd-a09c-
001e0bcb7a62
Name of the Drive Letter associated to this Remote
AccessPoint. For example, E:
Description of the Remote Service Access Point
For example, Accesspoint for the Device MSA2012fc
J200
CIM_EnabledLogicalElement
2 (Enabled)
5 (Not Applicable)
12 (Not Applicable)
CIM_ManagedSystemElement
The SCSI VPD Page 85 information of the device.
The information contains the http information of the
Target Based Management server of the Storage
Device.
For example, http://15.34.32.34
CIM_ServiceAccessPoint
HPHDR_RemoteServiceAccessPoint
HPHDR_ComputerSystem
Host Discovered Resources (HDR) 508