Hp_Powermanagementcapabilities - HP Integrity BL860c Datasheet

Table 2-5
Class: HP_PowerManagementService Properties
Property name
Table 2-6
Implemented Methods for HP_PowerManagementService Class
Method name
RequestPowerStateChange

2.3.5HP_PowerManagementCapabilities

HP_PowerManagementCapabilities extends the class CIM_PowerManagementCapabilities to model
the server power management capabilities. Only one instance of HP_PowerManagementCapabilities
is instantiated on an Integrity server.
The following properties are implemented.
Table 2-7
Class: HP_PowerManagementCapabilities Properties
Property name
Caption
Description
CIM_Capabilities
ElementName
InstanceID
PowerCapabilities
Property implementation
HP_PowerManagmentService
Method implementation
Method parameters:
•
•
The Time, Job and TimeoutPeriod parameters are not
supported and should be zero or NULL.
For more information, see the DMTF Power State
Management Profile (DSP01027).
Property implementation
CIM_ManagedElement
Power Management Capabilities
Power Management Capabilities
Power Capabilities 1
Power Capabilities 1
CIM_PowerManagmentCapabilities
•
•
PowerState – Input parameter of the new power
state requested. Supported values are: Power On
(2), Power Cycle Soft Off (5), and Power Off Soft
(8).
ManagedElement – Input parameter with the
reference to the HP_WinComputerSystem instance
for the power state change.
PowerCapabilities[0]: 3 (Power State Settable),
indicating whether P_State is supported by the
system.
PowerCapabilities[1]: 4 (Power Cycling
Supported)
Base server 23