18.3.11HPSCSI_DAPort
HPSCSI_DAPort represents the front-end port for an HBA in the host system. Direct Attached implies
that the SCSI HBA is attached to a local bus on the host (for example, PCI).
Table 18-12
Property name
ElementName
OperationalStatus[0]
EnabledDefault
EnabledState
RequestedState
CreationClassName
DeviceID
SystemCreationClassName
SystemName
UsageRestriction
PortType
18.3.12HPSCSI_HBASPIPort
HPSCSI_HBASPIPort represents the initiator port to connect to disk drives.
Table 18-13
Property name
Class: HPSCSI_DAPort (CIM_DAPort)
CIM_ManagedSystemElement
CIM_EnabledLogicalElement
Class: HPSCSI_SPIPort (CIM_SPIPort)
Property implementation
CIM_ManagedElement
Controller name and location (for example, SCSI
Controller Port 1 in Slot 4)
Port status
•
0 (Unknown)
•
2 (OK)
•
6 (Error)
CIM_LogicalElement
2 (Enabled)
5 (Not applicable)
12 (Not applicable)
CIM_LogicalDevice
HPSCSI_DAPort
Opaque key
HPSCSI_HBAComputerSystem
HBA Index
CIM_LogicalPort
2 (Front-End Only)
CIM_DAPort
82 (PCI)
HPSCSI_DAPort
Property implementation
CIM_ManagedElement
SCSI HBA 404
Need help?
Do you have a question about the Integrity BL860c and is the answer not in the manual?