HP Integrity BL860c Datasheet page 122

Table 10-2
Class: HP_CommonRecordLog Properties
Property name
OperationalStatus
StatusDescriptions
HealthState
EnabledState
RequestedState
EnabledDefault
MaxNumberOfRecords
CurrentNumberOfRecords
LogState
OverwritePolicy
InstanceID
LastLogClearedTime
LogBackUpDays
LogPercentFull
TimeOfLastChange
Property implementation
OperationalStatus[0] indicates the highest severity of
IPMI SEL log entries and will contain one of the
following:
•
2 (OK), only informational or repaired events exist
in the IPMI SEL log
•
3 (Degraded), at least one degraded event exists
in the IML log
•
6 (Error), at least one critical event exists in the
IPMI SEL log
StatusDescriptions[0] contains one of the following
corresponding to OperationalStatus[0]:
•
Local SEL log status is OK
•
Local SEL log status is DEGRADED
•
Local SEL log status is FAILED
•
5 (OK), when OperationalStatus[0]=2 (OK)
•
10 (Degraded), when OperationalStatus[0]=3
(Degraded)
•
20 (Major Failure), when OperationalStatus[0]=6
(Error)
CIM_LogicalElement
CIM_EnabledLogicalElement
2 (Enabled)
5 (No Change)
2 (Enabled)
CIM_Log
Maximum number of records in the IPMI SEL for this
platform. 0 indicates this is not supported.
Number of records in the SEL log
(HPQ_CommonLogEntry instances)
2 (Normal)
2 (Wraps When Full) The log is erased when full.
However, log is backed up to a file before it is erased.
CIM_RecordLog
HPQ:HPQ_CommonRecordLog
HP_CommonRecordLog
Date and time, when the log was cleared
recently.
Default value is 30 days.
Percentage of log currently used.
Time of last log change
SEL Record Log 122