HP Integrity BL860c Datasheet page 81

Table 7-2
Class: HP_Memory
Property name
Caption
Description
ElementName
OperationalStatus
StatusDescriptions
HealthState
Name
EnabledDefault
EnabledState
RequestedState
CreationClassName
DeviceID
SystemCreationClassName
Property implementation
System Memory
Logical system memory
System Memory
CIM_ManagedSystemElement
Enumerator indicating the logical system memory
operational status. The status represents the 'worst-of'
algorithm for all OperationalStatus[0] values reported
by physical memory modules in HP_MemoryModule
instances.
•
OperationalStatus[0] (shown in order of
increasing severity; a higher severity overrides a
lower severity):
○
○
○
This status does not represent the overall status of the
memory system; refer to the HP_MemoryCollection
class for overall memory system status.
StatusDescriptions[0] contains descriptive text per
OperationalStatus[0]:
•
System memory status: OK
•
System memory status: Unknown
•
System memory status: Degraded
•
5 (OK), when OperationalStatus[0]=2 (OK)
•
0 (Unknown), when OperationalStatus[0]=0
(Unknown)
•
10 (Degraded/Warning), when
OperationalStatus[0]=3 (Degraded)
System Memory
CIM_LogicalElement
CIM_EnabledLogicalElement
2 (Enabled)
5 (Not Applicable)
12 (Not Applicable)
CIM_LogicalDevice
HP_WinMemory
HPQ:HP_WinMemory:001
same value as property
HP_ComputerSystem.CreationClassName
2 (OK), when all physical memory modules
report 2 (OK)
0 (Unknown), when any physical memory
module reports 0 (Unknown)
3 (Degraded), when any physical memory
module reports 3 (Degraded)
System memory 81