HP Integrity BL860c Datasheet page 196

Table 15-6
Class: HPSA_StorageExtent (CIM_StorageExtent)
Property name
ElementName
Caption
Name
OperationalStatus[0]
EnabledDefault
EnabledState
RequestedState
CreationClassName
DeviceID
SystemCreationClassName
SystemName
TotalpowerOnHours
BlockSize
ConsumableBlocks
ExtentStatus[0]
NumberOfBlocks
Property implementation
CIM_ManagedElement
Disk location. This property contains the relative ports
and box information. For example, Port:m1,m2
Box:n1,n2, where m1 is the active port, m2 is the
passive port number, n1 is the box number relative to
the active port, and n2 is the box number relative to
the passive port.
Disk location. For example, Port:m1,m2 Box:n,
where m1 is the active port, m2 is the passive port
number, and n is the box number in which the drive is
located.
CIM_ManagedSystemElement
Serial number of drive
Operational Status for the disk drive
•
0 (Unknown)
•
2 (OK)
•
5 (Predictive Failure)
•
6 (Error)
CIM_LogicalElement
CIM_EnabledLogicalElement
2 (Enabled)
5 (Not Applicable)
12 (Not Applicable)
CIM_LogicalDevice
HPSA_StorageExtent
Opaque ID
HPSA_ArraySystem
HPSA_ArraySystem.Name
Total service hours reported for the disk drive.
CIM_StorageExtent
Block size in bytes
Total number of blocks on disk drive
This indicates extended status for the disk drive
Possible values:
•
2 (None)
•
11 (Rebuild – disk drive is currently rebuilding
data)
Total number of blocks on disk drive
Smart Array 196