HP Integrity BL860c Datasheet page 287

Table 15-122
HPSA_DeviceIndication: Enclosure Temperature sensor status changed to Warning
Property name
Description
AlertingMangedElement
AlertingElementFormat
AlertType
EventID
EventTime
ProviderName
RecommendedActions
SystemName
SystemCreationClassName
Summary
EventCategory
ProbableCause
ProbableCauseDescription
NetworkAddresses
OSType
OSVersion
ProviderVersion
SystemFirmwareVersion
SystemSerialNumber
SystemProductID
Property implementation
A Storage Enclosure Temperature sensor status
changed to Warning Condition. This indicates the
enclosure temperature is above normal, otherwise
enclosure is still operating normally.
WBEM path of the HPSA_StorageEnclosureProcessor
2 (CIMObjectPath)
5 (Device Alert)
308
Time of the event or time of the indication if event time
unknown.
HP Smart Array
Ensure that the system is adequately ventilated. Check
for proper room temperature and internal/external
airflow. Add or repair fans and air baffling if
necessary.
Name of the computer system generating the indication
CreationClassName of the computer system generating
the indication
HP_AlertIndication
Temperature sensor status Warning Condition
24 (Primary Storage Cooling)
51 (Temperature Unacceptable)
Temperature Status Changed to Warning Condition
A list of all the IP addresses (IPv4 and IPv6) of the
computer system generating the indication
•
70 (Windows Server 2003 64-bit)
•
77 (Windows Server 2008 64-bit)
•
103 (Windows Server 2008 R2)
Operating system version of the computer system
generating the indication in the format,
major.minor.build
Provider version generating the information, in the
form: major.minor.revision.build.
Firmware version of the computer system generating
the indication
Serial number of the computer system generating the
indication
Product ID of the computer system generating the
indication
Smart Array 287