Controller Redundancy State Has Been Set To Active - HP Integrity BL860c Datasheet

Table 15-108
Property name
BladeBay *
BladeName *
EnclosureName *
RackName *
RackUID *
SystemVirtualSerialNumber
SystemVirtualUUID
HWFirmwareVersion
HWLogicalLocation
HWManufacturer
HWSerialNumber
DeviceModel

15.4.10Controller Redundancy State Has Been Set to ACTIVE

Table 15-109
Property name
IndicationIdentifier
PerceivedSeverity
IndicationTime
Description
AlertingMangedElement
AlertingElementFormat
AlertType
EventID
EventTime
HPSA_DeviceIndication: Controller status changed to ERROR
HPSA_DeviceIndication: Controller Redundancy state has been set to ACTIVE
Property implementation
HP_BladeCSLocation.LocationInformation[0]
HP_ComputerSystem.Name
HP_BladeEnclosureCS.Name
Rack name if one exists
Rack Unique Identifier if one exists
Conditional property containing the virtual system
serial number string when running in a Virtual Connect
environment.
Conditional property containing the virtual system
UUID when running in a Virtual Connect environment.
HP_HardwareIndication
Array Controller firmware version string
Array Controller Location string
For example, Smart Array P600 in Slot 5
Array Controller Manufacturer string
Array Controller Serial Number
HP_DeviceIndication
Array Controller Model string
Property implementation
CIM_Indication
GUID string generated at the time of indication
3 (Warning)
Time of indication
CIM_AlertIndication
A Smart Array controller redundancy state has
changed from Standby to Active.
WBEM path to the HPSA_ArrayController class.
2 (CIMObjectPath)
5 (Device Alert)
3
Time of the event or time of the indication if event time
unknown.
Smart Array 258