Hp_Pcibridge - HP Integrity BL860c Datasheet

Table 8-2
Class: HP_PCIDevice
Property name
Capabilities
CapabilityDescriptions
ClassCode
BusNumber
DeviceNumber
FunctionNumber
PCIDeviceID
RevisionID
SubsystemID
SubsystemVendorID
VendorID

8.3.2HP_PCIBridge

HP_PCIBridge is used to model PCI bridge devices on Integrity servers. There is an instance of this
class for each logical PCI bridge device that has been detected in the system.
Table 8-3
Class: HP_PCIBridge
Property name
Property implementation
An array of integers that indicates controller
capabilities.
11: Provides Slot Identification
String describing the full location path of the PCI
device.
Examples:
Slot 2 (non-cellular systems)
Cabinet 8 Bay 0 Chassis 1 Slot 2 (cellular
systems)
The basic function of the PCI device - some code other
than 6 (Bridge).
CIM_PCIDevice
The bus number where this PCI device resides
The device number assigned to this PCI device for the
bus
The function number for this PCI device
PCI device ID as described in the configuration
registers for this PCI device
Revision ID as described in the configuration registers
for this PCI device
Subsystem ID as described in the configuration
registers for this PCI device
Subsystem Vendor ID as described in the configuration
registers for this PCI device
Vendor ID as described in the configuration registers
for this PCI device
HP_PCIDevice
Property implementation
CIM_ManagedElement
PCI Device 101