Hpsa_Diskdrive - HP Integrity BL860c Datasheet

Table 15-4
Class: HPSA_StorageVolume (CIM_StorageVolume)
Property name
Identify()
PhysicalDrvMultipathAccess
Primordial

15.3.4HPSA_DiskDrive

HPSA_DiskDrive represents the Hard drives connected to Smart Array controllers.
Table 15-5
Class: HPSA_DiskDrive (CIM_DiskDrive)
Property name
ElementName
Name
OperationalStatus[0]
OperationalStatus[1]
Property implementation
See HP Smart Array Profile
This is a new property added to the definition of
HPSA_StorageVolume. The definition is:
Uint16 PhysicalDrvMultipathAccess –
Value – Valuemap
•
1 (not supported) – Not supported by Array
Firmware
•
2 (not configured) – Supported by Array Firmware
but not configured
•
3 (configured redundant) – Volume is configured
with redundant physical paths on all physical
drives that make up the volume.
•
4 (configured non-redundant) – Volume is
configured with redundant paths but is currently
not redundant possibly due to failure of 1 or more
paths or a configuration error.
False – Can create and delete this element.
Property implementation
CIM_ManagedElement
Disk location
Examples:
Port: 1E Box 1 Bay: 5)
Port: 1E,2E Box 1, Bay:5 (SAS Disk with dual port)
CIM_ManagedSystemElement
Drive Serial Number
Operational Status for the disk drive
•
0 (Unknown)
•
2 (OK)
•
5 (Predictive Failure)
•
6 (Error) In the multipath scenario, if one or more
path to volume fails, OperationalStatus is
Degraded. If all path to volume fails,
OperationalStatus is Error.
See Smart Array Profile
CIM_LogicalElement
Smart Array 194