Removing A Usb Flash Device; Connecting Timing Cables; Connecting A Cable To The Bits Interface; Cisco Asr-920-24Sz-Im, Asr-920-24Sz-M, Asr-920-24Tz-M Aggregation Services Router Hardware Installation - Cisco ASR-920-24SZ-IM Hardware Installation Manual

Installing the Router
The figure below shows the USB port connector on the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M,
ASR-920-24TZ-M Router.
Figure 52: Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router Flash Token Memory Stick

Removing a USB Flash Device

To remove and replace a USB flash token memory stick from and into a Cisco ASR 920-24SZ-IM,
ASR-920-24SZ-M, ASR-920-24TZ-M Router, follow these steps:
SUMMARY STEPS
1. Pull the memory stick from the USB port.
2. To replace the Cisco USB Flash memory stick, simply insert the module into the USB port labeled USB
MEM, as shown in Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router Flash Token
Memory Stick figure. The Flash memory module can be inserted only one way, and can be inserted or
removed regardless of whether the router is powered up or not.
DETAILED STEPS
Step 1 Pull the memory stick from the USB port.
Step 2
To replace the Cisco USB Flash memory stick, simply insert the module into the USB port labeled USB MEM, as shown
in Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router Flash Token Memory Stick figure. The Flash
memory module can be inserted only one way, and can be inserted or removed regardless of whether the router is powered
up or not.
This completes the USB Flash memory installation procedure.

Connecting Timing Cables

The sections describe how to connect timing cables to the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M,
ASR-920-24TZ-M Router:

Connecting a Cable to the BITS Interface

The following steps describe how to connect a cable to the router's BITS port:

Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation

Connecting Timing Cables
Guide
111