About Display Priority Of Ais Targets - JRC JMR-7230-S Instruction Manual

6.3.6 About Display Priority of AIS Targets

Up to 500 *1 targets can be displayed in total of activated and sleeping AIS targets. Up to 500 activated
AIS targets can be displayed in the total.
When 95% of the maximum display count is exceed, "AIS 95% Capacity" alert ocuurs.When the
imum display count is exceed, "AIS maximum capacity" alert occurs.
When there is an AIS target of 500
order.
1. Numeric displayed target
High priority
2. Target of which CPA/TCPA is lower than the set value
(Target as a dangerous ship for which an alarm has been generated)
3. Target in automatic activation zone
4. Activated AIS target
5. Target inside AIS filter
Low priority
6. Target outside AIS filter
*1: The maximum number of AIS targets displayed can be changed to the option of 1000 targets.
If the number of targets at the same priority level exceeds the allowable maximum, they are displayed
in the following priority order:
1. Association target
High priority
2. Activated AIS target
3. Sleeping AIS target
Low priority
Memo
Maximum display number is sum of Class A AIS and Class B AIS.
Class A: The AIS that must be installed in the large ships specified in the SOLAS Convention.
Class B: The AIS for which medium and small sized vessels and fishing vessels are targeted.
*1 or more, the display is made according to the following priority
6-13 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27