Setting Up Anfter Replacing Display Units - JRC JMR-92 Series Field Service Manual

4.4.4.

Setting up anfter replacing Display Units

4.4.4.1 Clearing operation time of Workstation
Open the service menu for Engineers by entering password 0009 at [ Menu] -> [ Code Input ].
Click [ Maintenance] -> [ Operation Time Setup ] tab.
Clearing the total operation time of a Workstation
1. Click on the [ Clear ] button next of Total.
Clearing the operation time of a LCD
1. Click on the [ Clear ] button next of LCD.
Clearing the operation time of a LCD Fan
1. Click on the [ Clear ] button next of LCD FAN.
Clearing the operation time of a CCU Fan
1. Click on the [ Clear ] button next of CCU FAN.
Clearing the operation time of a CCU
1. Click on the [ Clear ] button next of CCU.
4-519 Chapter 4 Replacement procedure