Name And Function Of Each Unit; Name And Main Function Of The Operation Unit; Standard Operation Unit - JRC JMR-5410-4X Instruction Manual

Section 2
2.1 Name and Main Function of the
Operation Unit
2.1.1

Standard operation unit

[1] [2]
[13]
[11] [17] [18]
When turning off the power supply, do not hold down the power button of
the operation unit.
Otherwise, a trouble may occur due to termination failure.
No. Name
1 Power supply button
[RAIN] dial
2
[SEA] dial
3
[GAIN] dial
4
5 [MULTI] dial
6 USB terminal
7 [SILENCE] key
8 [ALERT ACK] key
9 [RANGE -]
(zoom-in) key
10 [RANGE +]
(zoom-out) key
Name and Function of
Each Unit
[3] [14] [15]
[16]
[4]
[21] [22] [19] [20]
Use this button to turn on and off this equipment.
• When this dial is turned, the level of rain/snow clutters on the radar image is
adjusted.
• When this dial is pressed, the function mode is switched to manual/automatic.
• When this dial is turned, the level of sea clutters on the radar image is adjusted.
• When this dial is pressed, the function mode is switched to manual/automatic.
• When this dial is turned, the gain of the radar image is adjusted.
• When this dial is pressed, the transmission pulse width is switched.
• Turn this dial to operate the function that is assigned to the [MULTI] dial such as
the Display Brightness function.
• If the [MULTI] dial is held down, the Display Brightness function is assigned to
the [MULTI] dial forcibly.
Connects a USB flash memory.
Stops the alert buzzer.
Acknowledging the alert.
• This key contracts the observation range by one level.
• When this key is held pressed, setting will step continuously until released.
• This key expands the observation range by one level.
• When this key is held pressed, setting will step continuously until released.
2-1
[7]
[6]
[5]
[12] [24]
Function outline
Section 2 Name and Function of Each Unit
[8]
[9]
[10]
[23]
[25]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1