Zoneremove - Brocade Communications Systems 8 Command Reference Manual

zoneRemove

Removes a member from a zone.
Synopsis zoneremove "zonename", "zoneMemberList"
Description Use this command to remove one or more members from an existing zone.
If all members are removed, the zone is deleted.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operands are required:
"zonename"
"zoneMemberList"
Examples To remove "array2" from "Blue_zone":
See Also zoneAdd, zoneCreate, zoneDelete, zoneShow
Fabric OS Command Reference
53-1001764-02
Specify the name of the zone from which to remove a member. Double
quotation marks are optional.
Specify a member or a list of members to be removed from the specified
zone. The list must be enclosed in double quotation marks. Members must
be separated by semicolons. A member can be one or more of the following:
•
A switch domain and port index pair: for example, "2,20". Use
switchShow for a list of valid port index numbers.
•
A world wide name
•
A zone alias name
switch:admin> zoneremove "Blue_zone", "array2"
2
zoneRemove
1025