Cascade Setting" Dialog Box - Yamaha DME Designer Owner's Manual

Chapter 4 Designer

"Cascade Setting" Dialog Box

Clicking the [Cascade Setting] button displays the "Cascade Setting" dialog box. Here you can
display DME64E cascade connections and make settings related to them. These settings are
common to the cascaded DMEs in the same zone.
Unit No. (Cascade Connection Number)
All DME units other than the first unit (default "1") are assigned automatically, and are grayed out
after connection indicating that the settings cannot be changed.
Head Margin
Here you can display and set the head margin for the Cascade connection audio signal. Select [0
db] or [-18 db]. All DME Unit No. settings for DME units other than the first unit will be automatically
set to the same value as the first unit when connected. These settings are grayed out after
connection indicating that they cannot be changed.
Mixer I/O Channel
Here you can display and set the channel used for audio input/output to a mixer. If the checkbox is
turned ON, the channel for the Cascade connection with the mixer is set. If turned OFF, the channel
for connecting with the DME is set.
[Check All] Button
Checks all checkboxes.
[Clear All] Button
Clears all checkboxes.
[OK] Button
Updates the settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.
166 DME Designer Owner's Manual