Yamaha DME Designer Owner's Manual page 64

Chapter 3 Main Panel Window
List
Displays the contents of the scene.
Scene No.
Displays the scene number. There are 999 scene memories available. Click here to select a scene.
Name
Displays the name of the scene. Click the [Name] box to enter a scene name. Up to 18 characters
can be entered.
If the scene has not been stored, "[No Data]" will be displayed. A name can be entered when a
scene is stored. The default names are "Scene001," "Scene002," etc. The three-digit number is the
same as the scene number (displayed in [Scene Number]) for the stored scene.
Configuration
Displays the configuration name. If the scene has not been stored, a hyphen (-) will be displayed.
Edit Security
Displays the scene edit security levels. Clicking here will display a list where you can change these
security levels. Only levels at or below the security level of the currently logged on user are
displayed in the list. When a user is created, these settings are the same as the new user's security
level, but scene store and edit settings can be set lower.
Recall Security
Displays the scene recall security level. Clicking here will display a list where you can change the
security level. Only levels at or below the security level of the currently logged on user are
displayed in the list. When a user is created, these settings are the same as the new user's security
level, but the scene recall setting can be set lower.
Fade
Fade is used when Fader components are used in a configuration. It sets whether fade is applied
(ON) or not (OFF) when a scene is recalled.
NOTE
The fade function cannot be simulated in DME Designer.
64 DME Designer Owner's Manual