Closing DME Designer
To close DME Designer, click [Exit] on the [File] menu of the Main Panel window. It can also be closed
by clicking the [Close] button on the Main Panel window.
1
Click [Exit] on the Main Panel window [File] menu.
When you try to close DME Designer, "Project File has been modified. Save?" will be displayed in a
dialog box.
NOTE
Sometimes the "Project File has been modified. Save?" dialog box will not be displayed.
2
To save the file, click [Yes]. To close without saving, click [No].
If you click [Yes], the file currently saved with the same name will be overwritten. If the file has not
been saved, the File Save dialog box will always be displayed.
Chapter 1 Before Using
DME Designer Owner's Manual
13