Miscellaneous - Yamaha DME Designer Owner's Manual

Chapter 6 Component Guide

Miscellaneous

In the Miscellaneous group, there are the Oscillator subgroup and the Wav File Player.
Oscillator
The Oscillator subgroup contains a monochannel oscillator component. The oscillator generates sine
waves at fixed frequencies of 100 Hz, 1 kHz, and 10 kHz, a variable frequency sine wave, pink noise,
and burst noise. The oscillator component has two outputs.
Double-click a component to display the component editor for it.
1
2
3
4
5
6
Pink Noise
A standard signal used for sound measurement.
This sound covers a frequency range of 20 Hz to 20 kHz. As the frequency doubles, the energy of
the sound is cut in half. The sound level is equal at all frequencies.
Burst
Outputs pink noise continuously.
358 DME Designer Owner's Manual
Section Parameter
Wave Form Sine
Noise
Frequency
Output Level
On
Meter
Oscillator component editor
1 2
6
4
5
3
Setting Range
100 Hz Selects the frequency and waveform that will
1 kHz be generated. Only one of the six [Sine] and
10 kHz [Noise] buttons can be selected.
Vari
Pink
Burst
20 Hz to 20 kHz When [Vari] is selected for [Sine], this sets
the frequency of the generated sine wave.
- to +6 dB Displays the signal level.
ON/OFF Turns ON the oscillator.
-- Displays the output signal level.
Function