Line Segment - Yamaha DME Designer Owner's Manual

Chapter 4 Designer

Line Segment

The line width default value is set from one to five pixels in the Designer window "Properties" dialog
box. In the "Wire Properties" dialog box, the line thickness and color can be adjusted as required
for the various wires arranged on the sheet.
Line Segment Selection
When you select a line segment by clicking on it, only that line segment is selected. If you hold
down the <Ctrl> key while clicking, you can select multiple line segments. Furthermore, if you drag
the mouse from an empty location on the sheet so that nodes are enclosed by a box, line segments
between those nodes will be selected.
Canceling Line Segment Selection
If you select another object or an empty location on the sheet, it will cancel selection of the object
you previously clicked.
You can also cancel selections by holding the <Ctrl> key while clicking.
220 DME Designer Owner's Manual
<Ctrl> + Click
Canceling Selection of a Line Segment
Selected with <Ctrl> + Click