Yamaha DME Designer Owner's Manual page 308

Chapter 5 Components
"Color Frame Properties" Dialog Box
The Color Frame Properties dialog box will appear when you right-click a solid frame and select
[Properties] from the contextual menu. Here you can enter the text to be displayed. Here you can
set the frame size and divider location.
Frame Size
The width is set using the [Width] and the height is set using [Height]. The units are pixels and the
minimum value is 3.
NOTE
You can change the size of a frame by dragging one of the marks at the four corners (top, bottom, left, right) of the frame
in the user control editor.
Frame Color
Sets the color of the color frame.
Click this button to display the "Select color" dialog box. For information about the "Select color"
dialog box, see
Fill Color
Sets the frame fill color.
Click the [Select Color] button to display the "Select color" dialog box. Refer to "Select Color"
Dialog Box in the Object section on
Line Width
Sets the thickness of the lines at [Top]/[Left]/[Right]/[Bottom]. Set "0" to display no lines.
308 DME Designer Owner's Manual
• [Position]
Displays the currently set line position. Displays the number of pixels from the top of the solid
frame when [Vertical] is selected for the [Direction], and the number of pixels from the left of
the solid frame when [Horizontal] is selected.
NOTE
You can change the position of a partition line by dragging one of the marks on the line in the user control editor.
• [Add] Button
If you set the position of the partition line in the box on the right and click the [Add] button, the
partition line will be added and displayed in the [Position] list.
• [Delete] Button
Deletes the partition line selected in the [Position] list.
page 203.
page 203 for information on this dialog box.