Yamaha DME Designer Owner's Manual page 368

Chapter 6 Component Guide
If you make the delay matrix component editor active while the [Delay Matrix - One Input to All
Outputs] editor window is displayed, and then click another input channel, that channel will be
displayed in the [Delay Matrix - One Input to All Outputs] editor window.
One [Delay Matrix - One Input to All Outputs] editor window is displayed for each delay matrix
component editor.
Crosspoint
If you click a level meter in the delay
matrix component editor, that group's
[Delay Matrix - Crosspoint] editor
window will be displayed. Turns the
input channels ON and OFF and sets
their levels. Just like the delay matrix
component editor, the input channels
are arranged vertically while the output
channels are arranged horizontally.
1
2
3
4
5
6
7
8
9
368 DME Designer Owner's Manual
Section Parameter
Input Channel
Output Channel
Bus Send Level Delay
Level
On
Block On
Off
Nominal
Minimum
[Delay Matrix - Crosspoint] editor window
2
3
4
5
1
Setting Range
-- Switches to another channel group.
-- Switches to another channel group.
0 to 500 Sets the delay time for each crosspoint.
- to +10 dB Sets the output signal level for each crosspoint.
ON/OFF Turns ON output for each crosspoint.
-- Turns ON output for all channels in the Crosspoint
window. The [On] button lights up.
-- Turns OFF output for all channels in the Crosspoint
window.
-- Resets all output signal levels in the Crosspoint
window, making them 0 dB.
-- Resets all output signal levels in the Crosspoint
window, making them - dB.
6
7
8
9
Function