Temporary Monaural Setting For Paired Input Channels/St In Channels - Yamaha PM1D Supplementary Manual

Value of the BALANCE parameter
PAN
Always lit
R
Odd-numbered (L) channel

Temporary monaural setting for paired input channels/ST IN channels

The input signal from paired input channels or ST IN
channels can now be temporarily converted to monau-
ral. You can select one of the following three modes.
Set to L-MONO
The channels will remain paired, but the signal will tem-
porarily become a monaural signal containing only the
odd-numbered channel.
The [ON] switch of the even-numbered channel will be
forced off, and the PAN (BALANCE) of the odd-num-
bered channel will be set to the center.
When PAN MODE is other than BALANCE
INPUT CHANNEL 1
PAN=CENTER
ON
INPUT CHANNEL 2
Fixed at OFF
When PAN MODE is BALANCE
INPUT CHANNEL 1
BALANCE=CENTER
ON
INPUT CHANNEL 2
Fixed at OFF
Set to R-MONO
The channels will remain paired, but the signal will tem-
porarily become a monaural signal containing only the
even-numbered channel.
The [ON] switch of the odd-numbered channel will be
forced off, and the PAN (BALANCE) of the even-num-
bered channel will be set to the center.
Temporary monaural setting for paired input channels/ST IN channels
PAN
Always lit
L
Even-numbered (R) channel
When PAN MODE is other than BALANCE
INPUT CHANNEL 1
Fixed at OFF
INPUT CHANNEL 2
PAN=CENTER
ON
When PAN MODE is BALANCE
INPUT CHANNEL 1
Fixed at OFF
INPUT CHANNEL 2
BALANCE=CENTER
ON
Set to LR-MONO
The channels will remain paired, but the signal will tempo-
rarily become a monaural signal containing both channels.
The PAN (BALANCE) of both channels will be set to the
center.
When PAN MODE is other than BALANCE
INPUT CHANNEL 1
PAN=CENTER
ON
INPUT CHANNEL 2
PAN=CENTER
ON
When PAN MODE is BALANCE
INPUT CHANNEL 1
BALANCE=CENTER
ON
INPUT CHANNEL 2
BALANCE=CENTER
ON
9