Yamaha DME Designer Owner's Manual page 370

Chapter 6 Component Guide
NOTE
If a 64 input 64 output Matrix Mixer component or a 64 input 32 output Matrix Mixer component is placed in the DME64N
configuration window, no other components can be used even though the resource meter does not reach 100%. The 64
input 64 output Matrix Mixer component or the 64 input 32 output Matrix Mixer component cannot be used in the DME24N.
Double-click a component to display the component editor for it. The number of input and output
channels varies depending on the component, but all share a common configuration in the
component editor.
The matrix mixer component editor consists of four sections: input, output, matrix, and block. The
[Master] buttons in the [Input] and [Output] sections display windows where you can make master
input and output settings. The level for each channel is set in separate windows that display four
channels each.
1
2
3
4
5
6
7
370 DME Designer Owner's Manual
2
3
1
Section
Input Master
Output Master
Matrix Output level meters
Block On
Off
Nominal
Minimum
Matrix Mixer component editor
Name
Opens the Input Master window.
Opens the Output Master window.
These meters display the output level for each channel.
Clicking here displays the Crosspoint window.
Turns ON output for all channels in the Crosspoint window.
Lights the [ON] button (does not change the matrix mixer
component editor).
Turns OFF output for all channels in the Crosspoint window
(does not change the matrix mixer component editor).
Resets all output levels in the Crosspoint window, making
them 0 dB.
Resets all output levels in the Crosspoint window, making
them - dB.
4
5
6
7
Function