Saving A File With A New Name - Yamaha DME Designer Owner's Manual

Saving Project Files
1
Click [File] menu [Save] in the Main Panel window.
If there is a file already saved with the same name, it will be overwritten.
When saving a project file for the first time, you must name the file before saving it. The "Save
As" dialog box will open, the same as when clicking the [File] menu [Save As] command. Enter
a filename and specify the folder where the file will be saved.

Saving a File with a New Name

With the [File] menu [Save As] command in the Main Panel window, you can save the currently
open file with a new filename. When saving for the first time, this creates a new file. A file that has
already been saved with a name will be saved as a separate file.
1
Click [File] menu [Save As] in the Main Panel window.
The "Save As" dialog box will be displayed.
2
Enter a filename into the [File name] box.
3
Specify the folder where the file will be saved.
4
Click the [Save] button.
Chapter 2 DME Designer Overview
DME Designer Owner's Manual 25